COLORADO SPRINGS - 719 Automotive Group LLC. - Auto Sales and Repair
Timed auction by Dickensheet & Associates, Inc.
Starts Feb 6, 2026 12:00 AM MST. Ends Feb 16, 2026 12:00 PM MST
COLORADO SPRINGS - 719 Automotive Group LLC. - Auto Sales and Repair ON BEHALF OF THE COLORADO DEPARTMENT OF REVENUE-ALL ITEMS WILL BE OFFERED IN BULK, THEN PIECEMEAL AND AWARDED IN THE HIGHEST MANNER. STAGGERED ONLINE BIDDING ENDS: Monday, February 16th 12:00 PM MT REMOVAL: Beginning Tuesday, February 17th 9:00 AM – 5:00 PM MT ADDRESS: 2514 E Platte Avenue, Colorado Springs, CO 80903 PURCHASER OR AUTHORIZED THIRD PARTY TO RELOCATE-CHECK IN WITH AUCTION TEAM UPON ARRIVAL with a paid invoice. MATTERS TO CONSIDER BEFORE PARTICIPATING 13% buyer's premium is charged on all purchases. APPLICABLE SALES TAX WILL BE COLLECTED AT PURCHASER'S LOCAL MOTOR VEHICLE DEPARTMENT ON APPLICABLE ITEMS. DEALERS-PLEASE SEND OVER A COPY OF YOUR DEALER'S LICENSE TO ASSURE PAPERWORK IS COMPLETED IN NAME CORRECTLY. Thank you. Some of these vehicles may be pulled from auction. Please fully review all photographs and run any/all Carfax, Experian, AutoCheck or other reports prior to bidding to feel comfortable with your purchase(s). CATALYTIC CONVERTER DISCLOSURE: Due to the nature of the origin of these vehicles, the Colorado Department of Revenue, nor Dickensheet & Associates, Inc. make any guarantee that any of these vehicles still have their catalytic converter. There will be no refunds or any kind of discount given if the vehicle is missing its catalytic converter. The vehicles being auctioned may be subject to open recall notices. It is the buyer’s sole responsibility to check for and act upon any applicable recall notices. Recalls and other vehicle safety information is available at the national highway traffic safety administration website: www.nhtsa.gov/recalls Unless stated in the description of the posting, keys are not available with vehicle. PURCHASER will be responsible for emissions, where applicable. Neither the Colorado Department of Revenue nor Dickensheet & Associates, Inc. guarantee emissions or that all equipment is located on the vehicle to obtain emissions. REGISTRATION INSTRUCTIONS Dickensheet & Associates, Inc. reserve the right to accept or reject any registration. Only complete and accurate registration will be approved. PO Box’s will automatically be rejected. PAYMENT INSTRUCTIONS An invoice will be forwarded to the registration email address following the conclusion of the auction. It is the bidders responsibility to assure invoice is received. ACCEPTED FORMS OF PAYMENT: CASH LOCATIONS FOR PAYMENT Auctioneer Location: 1501 W. Wesley Ave., Denver, CO 80223 Vectra Bank: Accepted at all Vectra Bank locations throughout the State of Colorado. Be aware these locations may be closed on Holiday’s. Please utilize the information below for the Vectra Bank location nearest to you. Vectra Bank Colorado Branch and ATM Locations ZELLE-Please send transfer info to sales@dickensheet.com, with your invoice number noted in the memo section. All Zelle payments would need to be completed by successful bidders to assure the payment is noted in Auctioneer’s account prior to payment deadline. Be aware Zelle transfers can take 24 hours to process and is the buyer’s responsibility to ensure payment is received on time. Please note that while Zelle itself does not charge a fee for its services, some banks or financial institutions may apply transaction fees or other charges on your end. Please review the terms and conditions of your bank or contact them directly to confirm whether additional fees may apply when using Zelle. CARD PAYMENTS Credit cards will not be accepted at this auction. WIRE TRANSFERS All wire transfers must be received by the auctioneers no later than the stated time outlined above. Be aware wire transfers can take 24 hours to process and is buyer’s responsibility to ensure payment is received on time. PAPERWORK FOR VEHICLE All paperwork shall be filled out in registered bidders name and address unless a change is requested. It is the buyer’s responsibility to ensure all paperwork is accurate. An AI assisted software was used to write portions of the Details of the Auction Info. PLEASE NOTE: PURCHASER HAS 30 DAYS FROM RECEIPT OF CERTIFICATE OF PURCHASE PAPERWORK TO REGISTER VEHICLE WITH THE APPROPRIATE MOTOR VEHICLE DEPARTMENT, AFTER THAT TIME PERIOD, THERE IS NO GUARANTEE THAT ANY CORRECTIONS/CHANGES CAN BE MADE, OR THE SELLER/AUCTIONEER WILL BE ABLE TO ASSIST WITH ANY ISSUES. 13% Buyer's Premum-cash, Zelle, wire transfer Sales Tax: 8.2% Dickensheet & Associates, Inc. 1501 West Wesley Avenue Denver, CO 80223 Telephone: (303) 934-8322 Toll Free: (877) 284-0338 Fax: (303) 934-8252 E-mail: customerservice@dickensheet.com
Lots
- #0A • AUCTION INFORMATION-DO NOT BID ON THIS LINE
- #0B • BULK VS PIECEMEAL OFFERING-DO NOT BID ON THIS LINE
- #1 • BULK BID - ALL TANGIBLE ASSETS OUTLINED BELOW
- #2 • SNAP-ON TRITON D-10 DIAGNOSTIC TOOL
- #3 • LONG RANGE HARMONIC BALANCER/PULLEY INSTALLER
- #4 • FORD 1.0L ECOBOOST ENGINE TIMING LOCKING TOOL KIT
- #5 • PITTSBURGH BOLT-TYPE WHEEL PULLER SET
- #6 • CAMSHAFT MINI TIMING KIT
- #7 • VALVE SPRING COMPRESSION KIT FOR MINI ENGINES
- #8 • VALVE SPRING COMPRESSION KIT
- #9 • CYLINDER LEAK-DOWN TESTER
- #10 • ENGINE CAMSHAFT FLYWHEEL LOCKING SET TIMING TOOL KIT
- #11 • CAMSHAFT ALIGNMENT TOOL FOR FORD
- #12 • TAP AND DIE KIT
- #13 • CRANKSHAFT PULLEY KIT
- #14 • HART SOCKET SET
- #15 • PROMAX ALAN PROKIT PROPLATE MOUNTING & APPLICATION
- #16 • CHRYSLER HARMONIC BALANCER PULLER
- #17 • MADDOX DELUXE DIESEL COMPRESSION TESTER
- #18 • TAP AND DIE KIT
- #19 • BETOOLL CAM TOOL HOLDING SET
- #20 • FOREVTL RIVET GUN
- #21 • DODGE 3.6L TIMING KIT
- #22 • BALL BEARING PRESS
- #23 • MADDOX PULLEY REMOVER & INSTALLER SET
- #24 • PAINTLESS DENT REPAIR WOYO PDR 007
- #28 • DOYLE RIVET SETTER
- #25 • NYLON FUEL LINE REPAIR KIT
- #26 • PITTSBURGH FUEL INJECTION PUMP TESTER
- #27 • STRUT SPRING COMPRESSOR KIT
- #29 • OTC COOLING SYSTEM PRESS TEST KIT
- #30 • ECOTEC CAM HOLDER
- #31 • MADDOX UNIVERSAL LOCKING LUG NUT REMOVAL SET
- #32 • DMT CAMSHAFT RETAINING TOOL SET
- #33 • PITTSBURGH 20 GALLON UNDERHOIST OIL DRAIN
- #34 • PITTSBURGH 20 GALLON UNDERHOIST OIL DRAIN
- #35 • PITTSBURGH 20 GALLON UNDERHOIST OIL DRAIN
- #36 • PITTSBURGH 20 GALLON UNDERHOIST OIL DRAIN
- #37 • MASTERCOOL COMMANDER SERIES R134A A/C RECOVERY,
- #38 • ROBINAIR AC1234-4 PREMIER R-1234YF RECOVERY, RECYCLING
- #39 • 24 GALLON SHOP VAC WITH ATTACHMENTS
- #40 • COMMERCIAL ELECTRIC WORKLIGHT
- #41 • NAPA ELECTRIC PRESSURE WASHER WITH WAND
- #42 • NAPA 5 GALLON AIR TANK
- #43 • CRAFTSMAN 3000 PSI GAS PRESSURE WASHER WITH ATTACHMENT
- #44 • PREDATOR 3500 WATT GAS GENERATOR
- #45 • UNDERHOIST SAFTY STAND, QTY (!)
- #46 • UNDERHOIST SAFTY STAND, QTY (!)
- #47 • NAPA TELESCOPIC TRANSMISSION JACK
- #48 • NAPA TELESCOPIC TRANSMISSION JACK
- #49 • TWO WHEEL DOLLY
- #50 • METAL STAND
- #51 • EASY REACH TOP SIDE CREEPER
- #52 • GRANTS MECHANIC ROLLING STOOL
- #53 • HUSKY 9 DRAWER TOOL BOX WITH CONTENTS
- #60 • OEM TOOLS VERTICAL AIR COMPRESSOR
- #54 • 3 TIER MEDIUM DUTY SHELVING UNIT WITH CONTENTS
- #55 • TRAKMOTIVE CV AXLES WITH BILSTEIN SHOCKS
- #57 • PORTACOOL SWAMP COOLER
- #56 • MOD PARTS CLEANER
- #58 • AIR HOSE REEL
- #59 • SPEEDAIRE HORIZONTAL AIR COMPRESSOR
- #61 • SUNEX 20 TON HYDRAULIC SHOP PRESS
- #62 • COATS PNEUMATIC TIRE CHANGER
- #63 • COATS 1000 SOLID STATE WHEEL BALANCER
- #64 • FRANKLIN 2.5 TON PALLET JACK
- #65 • DOVER 10,000LB TWO POST LIFT
- #66 • DOVER 10,000LB TWO POST LIFT
- #67 • DOVER 10,000LB TWO POST LIFT
- #68 • DOVER 10,000LB TWO POST LIFT
- #69 • DOVER 10,000LB TWO POST LIFT
- #70 • WORK BENCH WITH 8 INCH GRINDER
- #71 • PNEUMATIC IMPACT GUN
- #72 • DAUL MODE REFRIGERANT GAS LEAK DETECTOR
- #73 • VENOM MINI-DUCTOR
- #74 • TRANSMISSION JACK
- #75 • MANUAL BRAKE FLUID PRESSURE BLEEDER
- #76 • GREEN BULL 8' STEP LADDER
- #77 • WERNER 8' STEP LADDER
- #78 • DAVIDSON 6' STEP LADDER
- #79 • 14' EXTENSION LADDER
- #80 • OIL MEASURING CUPS WITH MANUAL SIPHON PUMP - QTY (3)
- #81 • PITTSBURGH 20 GALLON OIL LIFT DRAIN
- #82 • CEN-TECH 6/12V BATTERY CHARGER WITH ENGINE JUMP START
- #83 • NAPA AUTOMOTIVE FLOOR JACK
- #84 • DAYTONA JACK STANDS - QTY (4)
- #85 • HART 8 GALLON 6HP SHOP VAC WITH HOSE
- #86 • PNEUMATIC BRAKE FLUID PRESSURE BLEEDER
- #87 • 1,500LBS UNDER HOIST SUPPORT STAND
- #88 • HUSKY 60 GAL 3.7HP AIR COMPRESSOR
- #89 • PITTSBURGH ENGINE SUPPORT BAR
- #90 • PITTSBURGH 2 TON ENGINE CRANE
- #97 • ROTARY 10,000LB TWO POST LIFT
- #91 • PITTSBURGH 1 TON ENGINE STAND
- #92 • K-TOOL 1000LB TELESCOPIC TRANSMISSION JACK
- #93 • TRAXION TOPSIDE REACH CREEPER
- #94 • PARTS WASHER
- #95 • COATS 885 WHEEL BALANCER
- #96 • COATS RC 45 RIM CLAMP TIRE CHANGER
- #98 • WALL MOUNTED HOSE REEL
Showing the first 100 of 194 lots.